Cube Moulds:
Presentation of Cube Molds:
Blocks of crisp cement are made to inspect an assortment of properties on the in the long run cured and solidified cement. Crisp cement is subjected to a standard pressure administration in the block shape and is then ordinarily at first cured under particular research center conditions. The molds are made, subject to tight dimensional, hardness, squareness and surface complete prerequisites.
General Description and Specifications of Cube Molds:
Description:A. 3D shape Mold Mortar Cube Mold 50 x 50 x 50mm with a free base plate. Made of Mild Steel. B. 3D square Mold Mortar Cube Mold 50 x 50 x 50mm with the base plate. Made of Cast Iron C. Shape Mold Mortar Cube Mold 70.6 x 70.6 x 70.6mm with a free base plate. Made of Mild Steel D. 3D shape Mold Mortar Cube Mold 70.6 x 70.6 x 70.6mm with a base plate. Made of Cast Iron E. Shape Mold Concrete Cube Mold 100 x 100mm with a base plate. Made of Cast Iron F. Block Mold Concrete Cube Mold 150 x 150 x 150mm with a base plate. Made of Cast Iron G. Solid shape Mold Concrete Cube Mold 150 x 150 x 150mm with a base plate. Made of Cast Iron Accuracy Equivalent to ISI Marked Complete with base plate. The characteristics of the form are machined level to +/ - 0.02mm exactness and completed to inside +/ - 0.2mm of determined measurements. Material for development of molds is Cast Iron or Mild steel. The molds are sufficiently hefty to anticipate twisting and encourage the expulsion of the formed example without harm. The Molds are machined to the point that when they are amassed prepared for utilizing, the measurements and inside appearances are exact inside as far as possible. Inward faces of the molds are smooth.
Block Mold - ISI Specification: For concrete compressive quality testing we offer profoundly refined testing machines properly made by our architects and professionals remembering the general utilization. Our solid compressive quality testing machines incorporate solid quality testing molds like sCube Mold, Beam Molds, Cylindrical Molds alongside Flexural Strength Testing Machine that is outfitted with the most recent outlines and working standard. Four standard sizes of 3D shape molds are offered and provided a finish with the base plate. Demonstrate SL-CC-008.
The base plate is appended to the form by spikes.The parts of the shape, when amassed, are decidedly and unbendingly held together amid filling, resulting dealing with and vibration where material.
SIZES AVAILABLE: 50MM/100MM/150MM
Discretionary ACCESSORIES
SPANNER FOR DEMOULDING AND Molding,
Packing ROD WITH SQUARE FACE.
3D square Mold 7.06 CMS(FOR CEMENT MORTAR):
According to IS: 10086-1982, The 3D square shape is so built in order to encourage partition into two sections. The mass of the form together with the base plate will be 2.8 +/ - 0.2 kg. Material for development of these molds is mellow steel.
Blocks of crisp cement are made to inspect an assortment of properties on the in the long run cured and solidified cement. Crisp cement is subjected to a standard pressure administration in the block shape and is then ordinarily at first cured under particular research center conditions. The molds are made, subject to tight dimensional, hardness, squareness and surface complete prerequisites.
General Description and Specifications of Cube Molds:
Description:A. 3D shape Mold Mortar Cube Mold 50 x 50 x 50mm with a free base plate. Made of Mild Steel. B. 3D square Mold Mortar Cube Mold 50 x 50 x 50mm with the base plate. Made of Cast Iron C. Shape Mold Mortar Cube Mold 70.6 x 70.6 x 70.6mm with a free base plate. Made of Mild Steel D. 3D shape Mold Mortar Cube Mold 70.6 x 70.6 x 70.6mm with a base plate. Made of Cast Iron E. Shape Mold Concrete Cube Mold 100 x 100mm with a base plate. Made of Cast Iron F. Block Mold Concrete Cube Mold 150 x 150 x 150mm with a base plate. Made of Cast Iron G. Solid shape Mold Concrete Cube Mold 150 x 150 x 150mm with a base plate. Made of Cast Iron Accuracy Equivalent to ISI Marked Complete with base plate. The characteristics of the form are machined level to +/ - 0.02mm exactness and completed to inside +/ - 0.2mm of determined measurements. Material for development of molds is Cast Iron or Mild steel. The molds are sufficiently hefty to anticipate twisting and encourage the expulsion of the formed example without harm. The Molds are machined to the point that when they are amassed prepared for utilizing, the measurements and inside appearances are exact inside as far as possible. Inward faces of the molds are smooth.
Block Mold - ISI Specification: For concrete compressive quality testing we offer profoundly refined testing machines properly made by our architects and professionals remembering the general utilization. Our solid compressive quality testing machines incorporate solid quality testing molds like sCube Mold, Beam Molds, Cylindrical Molds alongside Flexural Strength Testing Machine that is outfitted with the most recent outlines and working standard. Four standard sizes of 3D shape molds are offered and provided a finish with the base plate. Demonstrate SL-CC-008.
The base plate is appended to the form by spikes.The parts of the shape, when amassed, are decidedly and unbendingly held together amid filling, resulting dealing with and vibration where material.
SIZES AVAILABLE: 50MM/100MM/150MM
Discretionary ACCESSORIES
SPANNER FOR DEMOULDING AND Molding,
Packing ROD WITH SQUARE FACE.
3D square Mold 7.06 CMS(FOR CEMENT MORTAR):
According to IS: 10086-1982, The 3D square shape is so built in order to encourage partition into two sections. The mass of the form together with the base plate will be 2.8 +/ - 0.2 kg. Material for development of these molds is mellow steel.
Comments
Post a Comment